•  
  •  
 

Journal of Mechanical Engineering Science and Technology (JMEST)

Abstract

Polylactic acid (PLA) is a polymer widely applied for 3D printing. However, PLA is brittle, necessitating reinforcement through the addition of nanomaterials. This study investigates the influence of nanographite on the mechanical properties of extruded PLA filaments. An exploratory and experimental research methodology was employed. The methods include the mixing of the PLA and nanographite at concentrations of 0.5%, 1.0%, and 1.5% using a solution-based technique involving chloroform and magnetic stirring. The resulting dried PLA-nanographite mixture was cut into pellet-like shapes before being extruded into filaments using a single screw filament at 175 ⁰C. The extruded filaments underwent mechanical testing (tensile tests), and fracture morphology was observed under Scanning Electron Microscopy (SEM). Results indicate that analysis of the fracture surface morphology revealed a reduction in ductile fracture characteristics in the PLA following the addition of nanographite, indicating increased material stiffness. Adding nanographite improved the mechanical properties of the PLA, with a maximum tensile strength of 49.79 MPa and an elastic modulus of 1046.3 MPa. The addition of nanographite effectively improves the mechanical properties of PLA filaments, as shown by increases in tensile strength and elastic modulus and a shift toward a more rigid fracture structure. The filaments exhibit ductile fracture characteristics in the control PLA, as well as a transition toward brittle fracture.

Publisher

State University of Malang (UM)

First Page

380

Last Page

389

Share

COinS