•  
•  

Journal of Mechanical Engineering Science and Technology (JMEST)

Editor in Chief

Prof. Dr. Ir. Heru Suryanto

Department of Mechanical Engineering, Universitas Negeri Malang, Indonesia
Scopus ID: 55992540200, H-Index = 13
Research Topic: Bacterial Cellulose Applications in Biomedical Engineering, Additive Manufacturing Materials and Processes, Natural Fiber Reinforced Composites for Sustainable Application, Polylactide Nanocomposites and Properties, Impeller Dynamics in Viscous Fluid Mixing, Bioplastics from Starch and Waste Materials.

Managing Editor

1. Yanuar Rohmat Aji Pradana, MSc.

Department of Mechanical Engineering, Universitas Negeri Malang, Indonesia
Scopus Id. 57204058897, H index = 5
Research Topic: Cutting Fluids for Enhanced Machining, Additive Manufacturing Materials and Processes, Strengthening Polymer-Metal Hybrid Joints, Bulk Metallic Glass Applications, Electric Discharge Machining Techniques, Geopolymers: Sustainable Materials for Enhanced Strength.

2. Prof. Dr. Sukarni Sukarni

Department of Mechanical Engineering, Universitas Negeri Malang, Indonesia
Scopus Id. 56469591700, H-Index = 14
Research Topic: Pyrolysis Kinetics and Energy Analysis of Biomass, Enhancing Thermal Conductivity with Nanofluids, Briquette Production from Biomass Waste Materials, Biodiesel Blends and Diesel Engine Performance, Catalytic Pyrolysis of Microalgae for Bio-Oil Production, Nanofluids in Solar Thermal Energy Systems.

Editorial Board Member

1. Prof. Dr. Andoko Andoko

Department of Mechanical Engineering, Universitas Negeri Malang, Indonesia.
Scopus ID. 56013144100, H-Index = 10
Research Topic: Connecting Rod Design and Materials, Aluminum Foam Structures for Energy Absorption, Energy Absorption Mechanisms in Thin-Walled Structures, Blended Wing Body Aircraft Design Innovations, Impact of Advanced Materials on Vehicle Safety, Stress analysis, Fatigue.

2. Prof. Dr. Maziar Ramezani

Auckland University of Technology, New Zealand
Scopus ID. 24081569700, H-Index = 25
Research Topic: Hydrogels with Enhanced Mechanical and Self-Healing Properties, Cobalt Alloys and Their Corrosion Resistance Properties, Tribocorrosion Effects on Material Performance, Tribological Properties of Polyethylene in Joint Implants, Innovative Ceramic Manufacturing through Additive Techniques.

3. Dr. Nandang Mufti

Department of Physics, Universitas Negeri Malang, Indonesia
Scopus ID. 24470103100, H-Index = 23
Research Topic: Magnetic Iron Oxide Nanoparticles in Biomedical Applications, CIGS Solar Cell Performance, Properties and Applications of Bismuth Ferroelectric Materials, Pyrolysis Kinetics and Energy Analysis of Biomass, Zinc Oxide Nanostructures in Photocatalytic Applications, Briquette Production from Biomass Waste Materials, Enhancements in Photoelectrochemical Water Splitting Technologies.

4. Prof. Dr. Purnomo Purnomo

Universitas Muhamadiyah Semarang, Indonesia
Scopus ID. 56736074000, H-Index = 7
Research Topic: Mechanical Properties of Acrylic Denture Resins, Fuzzy Time Series Models for Stock Forecasting, Fracture Toughness and Essential Work in Materials, Polylactide Nanocomposites and Properties, Plasma Treatment Effects on Polymer Surface Properties, Cutting Fluids for Enhanced Machining.

5. Dr. Azlin Fazlina Osman

Faculty of Chemical Engineering & Technology, Universiti Malaysia Perlis (UniMAP), Malaysia
Scopus ID. 54891813000, H-Index = 23
Research Topic: Rubber Nanocomposites with Carbon Fillers, Mechanical Properties of Starch-Based Composites, Natural Fiber Composites and Mechanical Properties, Natural Fiber Reinforced Composites for Sustainable Applications, Properties and Applications of Polymer-Clay Nanocomposites, Carbon-Based Composites for Enhanced Electrical Conductivity.

6. Dr. Joseph Selvi Binoj

Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, (SIMATS), India.
Scopus ID. 57006672200, H-Index = 33
Research Topic: Natural Fiber Reinforced Composites for Sustainable Applications, Optimizing Surface Quality in Wire Electrical Discharge Machining, Additive Manufacturing Materials and Processes, Bacterial Cellulose Applications in Biomedical Engineering, Strength and Bonding in Magnesium Alloys, Integrating Neural Networks in Healthcare Systems.

7. Dr. Majid Niaz Akhtar

Department of Basic Sciences and Humanities, Muhammad Nawaz Sharif University of Agriculture, Pakistan
Scopus ID. 37066950400, H-Index = 45
Research Topic: Magnetic Properties and Applications of Ferrite Nanoparticles, Magnetic Properties and Structural Insights of Hexaferrites, Microwave Absorption Properties of Composite Materials, Metamaterial Absorbers for Enhanced Electromagnetic Applications, Innovative Composite Materials for Fuel Cell Applications, Solid Oxide Fuel Cell Innovations and Materials.

8. Dr. Mavinkere Rangappa Sanjay

King Mongkut’s University of Technology North Bangkok, Thailand
Scopus ID. 57042636700, H-Index = 86
Research Topic: Natural Fiber Reinforced Composites for Sustainable Applications, Cellulose Nanocrystals in Advanced Composite Materials, Natural Fiber Composites and Mechanical Properties, Graphene Reinforced Composites for Enhanced Properties, Tribological Properties of Composite Materials, Friction Materials for Brake Systems, Additive Manufacturing Materials and Processes.

9. Dr. Mohammad Salim Kaiser

Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Scopus ID. 57061676400, H-Index = 11
Research Topic: Microstructural Effects on Aluminum Alloy Properties, Properties and Performance of Copper Alloys, Microalloying Effects in Aluminum Alloys, Thermal Modification Effects on Wood Properties, Fire Risks in Informal Settlements and Community Responses, Corrosion Inhibitors for Steel Protection and Efficiency, Natural Fiber Composites and Mechanical Properties, Tribological Properties of Composite Materials.

10. Dr. Poppy Puspitasari

Department of Mechanical Engineering, Universitas Negeri Malang, Indonesia.
Scopus ID. 35183934100, H-Index = 15
Research Topic: Enhancing Thermal Conductivity with Nanofluids, Utilization of Eggshells in Sustainable Materials, Nanoparticle Innovations in Tribological Performance, Seismic Vulnerability Assessment of Reinforced Concrete Structures, Mechanical Properties of Friction Stir Welded Aluminum Alloys, Biodiesel Blends and Diesel Engine Performance, Briquette Production from Biomass Waste Materials, Nanofluids in Solar Thermal Energy Systems.

11. Dr. Hajer Chemingui

Centre de Recherches et des Technologies des Eaux, Soliman, Tunisia
Scopus ID. 57203329167, H-Index = 7
Research Topic: Nanoparticles in Enhancing Agricultural Productivity, Innovative Adsorbents for Dye Removal Applications, Zinc Oxide Nanoparticles in Green Synthesis Applications, Biosorption Mechanisms for Heavy Metal Removal, Zinc Oxide Nanostructures in Photocatalytic Applications, Membrane Innovations for Water Treatment Applications, Ecotourism and Community Conservation Dynamics.

12. Dr. M. V. Reddy

Institute of Research Hydro-Québec, Canada
Scopus Id. 57216102131, H-Index = 74
Research Topic: Sodium-Ion Batteries: Innovations in Energy Storage, Lithium Ion Battery Cathode Materials, Organic Materials in Energy Storage Solutions, Magnesium Ion Batteries for Enhanced Energy Storage, Innovative Electrocatalysts for Hydrogen and Oxygen Production, Sustainable Carbon Materials for Energy Storage Applications, Nanostructured Materials for Enhanced Lithium Storage, Solid Electrolytes for High-Performance Lithium Batteries.

13. Dr. Norani Muti Mohamed

Department of Fundamental & Applied Sciences, Universiti Teknologi Petronas, Malaysia
Scopus ID. 15123067000, H-Index = 27
Research Topic: Enhancing Dye-Sensitized Solar Cell Performance, Enhancing Photocatalytic Activity with Quantum Dots, Hybrid Nanoflowers and Metal Organic Frameworks in Enzyme Applications, Sustainable Carbon Materials for Energy Storage Applications, Biodiesel Blends and Diesel Engine Performance, Titanium Dioxide Nanotubes in Advanced Applications, Photocatalytic Innovations in Bismuth Vanadate Applications.

14. Michael Ikpi Ofem

Department of Mechanical Engineering Cross River University of Technology Calabar, Nigeria
Scopus ID. 55338552000, H-Index = 5
Research Topic: Graphene Nanocomposites for Enhanced Electrical Properties, Carbon Emission Dynamics and Energy Transition in China, Natural Fiber Reinforced Composites for Sustainable Applications, Mechanical Properties of Starch-Based Composites.

15. Nithin Panicker

Oak Ridge National Laboratory, Oak Ridge, Tennessee, United States
Scopus ID. 57222227642, H-Index = 3
Research Topic: Hydrodynamics and Mass Transfer in Bubble Columns, Aluminum Reduction Cell Technology, Oxidation Mechanisms in High-Temperature Alloys, Combustion Technology for Emission Reduction.

16. Senthil Kumar A

Department of Mechanical Engineering, Sethu Institute of Technology, India
Scopus ID. 57536712800, H-Index = 21
Research Topic: Enhancing Thermal Conductivity with Nanofluids, Mechanical Properties of Aluminum Matrix Composites, Energy Absorption Mechanisms in Thin-Walled Structures, Machining Challenges in Carbon Fiber Composites, Magnesium Alloy Nanocomposites for Enhanced Mechanical Properties, Properties and Performance of Aluminum Lithium Alloys, Metallic Matrix Composites for Enhanced Wear Resistance.

17. Chitaranjan Pany

Vikram Sarabhai Space Centre, India
Scopus ID. 6602933153, H-Index = 9
Research Topic: Wave Propagation in Finite Element Structures, Thermochemical Erosion in Rocket Nozzle Systems, Integration of Unmanned Aerial Vehicles in Airport Operations, Seismic Resilience of Reinforced Concrete Structures.

18. Prof. Dr. Januar Parlaungan Siregar

Faculty of Mechanical & Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Malaysia
Scopus ID. 57189757307, H-Index = 27
Research Topic: Materials science and engineering, natural fibre and polymer composites, bio composites.

19. Dr. A. Kumaravel

K.S.Rangasamy College of Technology, India
Scopus ID. 56892709100, H-Index = 22
Research Topic: Mechanical Properties of Aluminum Matrix Composites, Corrosion Inhibitors for Steel Protection and Efficiency, Mechanical Properties and Corrosion Resistance of Titanium Alloys, Innovative Approaches in Supplier Selection and Evaluation, Abrasive Water Jet Machining for Material Precision, Fuzzy Differential Equations and Their Applications, Nanocomposite Dielectrics for Enhanced Electrical Properties.

Copy/Layout Editor/Proofreader

1. Ahmad Atif Fikri, Ph.D.

Universitas Negeri Malang, Indonesia
Scopus ID. 58853563100, H-Index = 1
Research Topic: Dioxin Emissions and Formation in Waste Incineration, Image Processing Techniques for Particle Size Measurement.

2. Redyarsa Dharma Bintara, M.Sc.

Universitas Negeri Malang, Indonesia
Scopus ID: 57209293324, H index = 4
Research Topic: Additive Manufacturing Materials and Processes, stress analysis, Design.

 

Reviewers

1. Aminnudin

Universitas Negeri Malang, Indonesia

Scopus ID. 55992838400, H-Index = 6

Research Topic: ECAP, Mist Cooling, Tribology, Metal Matric Composite, Material Science

2. Dr. Dewa Ngakan Ketut Putra Negara

Udayana University, Indonesia

Scopus ID. 55863500100, H-Index = 8)

Research Topic: Activated Carbon Applications in Environmental Remediation, Innovative Materials for Carbon Dioxide Capture, Microstructural Insights into Aluminum Alloy Precipitation, Electrodeposition Techniques for Nanocrystalline Alloy Coatings, Biogas Utilization in Diesel Engine Performance.

3. Prof. Dr. Ir. IGN Nitya Santhiarsa

Udayana University, Indonesia

Scopus ID. 55863500100, H-Index = 3

Research Topic: Natural Fiber Reinforced Composites for Sustainable Applications, Sustainable Carbon Materials for Energy Storage Applications, Robotic Grasping Techniques for Object Manipulation, Photocatalytic Fuel Cells for Sustainable Energy

4. Hendry Yoshua Nanlohy

Jayapura University of Science and Technology, Indonesia

Scopus ID. 57196943182, H-Index = 6

Research Topic: Dynamics of Droplet Combustion in Fuel Systems, Biodiesel Blends and Diesel Engine Performance, Micro Combustion Systems and Catalysis, Ethanol Blends in Spark Ignition Engines, Gasification Technologies for Biomass Energy Production

5. Dr Mahros Darsin

University of Jember, Indonesia

Scopus ID. 56012509700, H-Index = 4

Research Topic: Additive Manufacturing Materials and Processes, Cutting Fluids for Enhanced Machining, Electrochemical Discharge Machining for Advanced Materials, Powder Injection Molding Techniques, Machinability and Surface Integrity of Alloys

6. Gaguk Jatisukamto

University of Jember, Indonesia

Scopus ID. 57190941751, H-Index = 4

Research Topic: Additive Manufacturing Materials and Processes, Microstructural Effects on Aluminum Alloy Properties, Corrosion Mechanisms in High-Temperature Alloys, Molten Salt Reactor Design, Dynamic Optimization of Powertrain Mounting Systems

7. Prihanto Trihutomo

Universitas Negeri Malang, Indonesia

Scopus ID. 57209983302, H-Index = 3

Research Topic: Natural Dyes in Dye-Sensitized Solar Cells, Carbon-Based Electrocatalysts for Oxygen Reduction Applications, Graphene Nanocomposites and Their Multifaceted Applications, Magnetic Properties and Phase Stability in Alloys

8. Suprayitno, Ph.D.

Universitas Negeri Malang, Indonesia

Scopus ID. 57204054491, H-Index = 6

Research Topic: Optimizing Injection Molding for Quality Plastic Parts, Additive Manufacturing Materials and Processes, Optimizing Laser Cutting for Enhanced Material Processing, Surrogate Models in Microwave Antenna Design, Optimization of Weld Quality in Metal Fabrication

9. Susi Marianingsih

University of Science and Technology Jayapura, Indonesia

Scopus ID. 57208602514, H-Index = 4

Research Topic: Ethanol Blends in Spark Ignition Engines, Artificial Neural Networks in Diesel Engine Optimization

10. Avita Ayu Permanasari

Universitas Negeri Malang,Indonesia

Scopus Id. 57193696674, H-Index = 11

Research Topic: Enhancing Thermal Conductivity with Nanofluids, Pyrolysis Kinetics and Energy Analysis of Biomass, Nanoparticle Innovations in Tribological Performance, Biodiesel Blends and Diesel Engine Performance, Photovoltaic Thermal Systems

11. Retno Wulandari

Universitas Negeri Malang, Indonesia

Scopus ID. 57555730000, H-Index = 7

Research Topic: Blended Wing Body Aircraft Design Innovations, Cross Flow Turbines for Sustainable Hydropower, Vortex Shedding Dynamics in Circular Cylinder Flows, Quality Assessment of Roasted Coffee Varieties, Resilience Strategies for Power Distribution Systems, Vortex Generators for Enhanced Heat Transfer

12. Soen Steven

Research Center For Sustainable Production System and Life Cycle Assessment, National Research and Innovation Agency (BRIN), South Tangerang, Banten, Indonesia

Scopus ID: 57223319728, Hindeks 18

Research Topic: Swirl Flow Dynamics in Gas Turbine Cooling, Silica Nanoparticles from Agricultural Waste Utilization, Recirculating Aquaculture Systems, Pyrolysis Innovations for Sustainable Biofuel Production, Microalgae as Sustainable Biofuel Feedstock

13. Anggit Murdani

Politeknik Negeri Malang, Indonesia

Scopus ID: 12790361100, Hindeks 7

Research Topic: Multiaxial Fatigue Models for Material Life Prediction, Microforming Techniques and Size Effect Insights, Magnet Design for Light Sources

14. Abu Saad Anshari

Center of Excellence Applied Nanotechnology, Nano Center Indonesia Research Institute, Puspiptek street, South Tangerang, Banten, Indonesia

Scopus ID: 57196764680, H-Index = 16

Research Topic: Nano material science